Fused Solar and Roofing panel cleaning card: Ask before they clean: licensed? insured? Call or text (813) 285-4505

Who Can Clean My Solar Panels in Tampa Bay? Ask This First

November 18, 2026

Your solar panels should be cleaned by a licensed contractor who carries workers' comp and liability insurance and who cleans the way your panel maker's instructions allow. That matters for two reasons: cleaning with a pressure washer or a stiff or abrasive brush can void the panel manufacturer's warranty, and if an uninsured worker is hurt on your roof, it can come back on you as the homeowner. Fused Solar and Roofing does this work in Hillsborough, Pinellas, Pasco and Manatee counties for $10 per panel with a $395 minimum. Call or text (813) 285-4505.

Fused Solar and Roofing is a licensed electrical, roofing and building contractor (EC13014750, CCC1331058, CBC1252064), in business since 2007. We carry general liability and workers' comp and will show you proof on request.

What panel makers allow, and what they forbid

Panel makers publish cleaning instructions in their installation or maintenance manuals. They agree on the basics: soft tools, clean water, cool glass, no abrasives, no harsh chemicals. Here is what six say, in our words.

  • REC: No high-pressure hoses or cleaners. Soft brush, sponge or microfiber with deionized water, on cool panels. No acidic or alkaline detergents. (REC manual, 2024)
  • Qcells: No abrasives. Qcells says damage caused by cleaning, cleaning tools or cleaning agents is not covered by its warranty. (Qcells manual, 2023)
  • Canadian Solar: Non-abrasive brush or sponge, cool part of the day, no unapproved chemicals. Canadian Solar says damage from inappropriate cleaning will void its warranty. (Canadian Solar manual, 2020)
  • Panasonic (EverVolt): No high-pressure hoses or cleaners. Soft brush or sponge, room-temperature deionized water, cool modules. Panasonic says detergent damage is not covered by its warranty. (Panasonic manual, 2024)
  • Jinko: Never use abrasives. Hose pressure under about 98 psi, early morning or late afternoon. Jinko says chemicals may affect the warranty. (Jinko manual, 2026)
  • LONGi: Water pressure capped at about 100 psi. Soft nylon brushes only; no metal tools or abrasive powder. Water within about 18°F of panel temperature. (LONGi manual, 2024)

Your panel brand is on the label on the back of each panel and in your install paperwork.

Why a pressure washer or a stiff brush is the usual mistake

Most cleaning damage comes from treating panels like a driveway. Panel makers say high-pressure cleaners can damage modules, and a stiff or abrasive brush can scratch the glass. The damage may not show right away.

The other common mistake is cold water on hot glass. Several manufacturers warn that a sudden temperature change can break the glass, so careful cleaners work early in the day or when panels are cool.

⚠️ Warning: A pressure washer or a stiff or abrasive brush can void your solar panel manufacturer's warranty. Ask any cleaner exactly what equipment they will use before they start.

Why license and insurance matter for anyone on your roof

Panel cleaning is roof work: ladders, a pitched roof, wet glass and live electrical equipment. If the person doing it is hurt and has no workers' comp, it can come back on the homeowner. Florida's Department of Business and Professional Regulation warns that an uninsured contractor can leave a homeowner with possible liability for injuries on their property.

Ask for proof of liability insurance and workers' comp before anyone climbs up. Florida's Division of Workers' Compensation keeps a proof-of-coverage database, and you can check a license at myfloridalicense.com.

This is general information, not legal advice.

Five questions to ask any solar panel cleaner

  1. "What license do you hold?" A good cleaner gives you a license number you can look up yourself.
  2. "Can you show me proof of workers' comp and liability insurance?" A good cleaner sends the certificates before the visit, without being pushed.
  3. "What will you clean with?" A good answer: soft brushes, purified or deionized water, no pressure washer, no harsh chemicals.
  4. "Do you know what my panel maker allows?" A good cleaner checks the brand and follows that manual.
  5. "Will you tell me what you see up there?" A good cleaner tells you about cracked glass, loose wiring, animal damage or roof problems instead of just rinsing and leaving.

What Fused's cleaning and annual service plan include

Panel cleaning on its own: $10 per panel, $395 minimum. We use soft brushes and purified water on cool glass, follow the panel manufacturers' cleaning instructions on every cleaning, and tell you about anything we notice on the roof. Details are on our solar panel cleaning page.

Annual service plan: includes an inspection, one cleaning, a written report, and priority scheduling.

  • 1 to 25 panels: $495 a year
  • 26 to 45 panels: $595 a year
  • 46 to 65 panels: $695 a year
  • 66 or more panels: custom quote

See the solar maintenance plan. If something is already wrong, start with solar repair. Not sure your system is producing what it should? Use our free electric bill check; we answer within 24 hours of receipt, excluding weekends.

🔑 Key Takeaway: Hire a licensed, insured contractor who cleans the way your panel maker allows. The wrong method can cost you your warranty, and an uninsured worker can become your problem.

Frequently asked questions

Who can clean my solar panels in Tampa Bay?
A licensed contractor who carries workers' comp and liability insurance and cleans the way your panel maker allows. Fused Solar and Roofing is a licensed electrical, roofing and building contractor (EC13014750, CCC1331058, CBC1252064), insured, serving Hillsborough, Pinellas, Pasco and Manatee counties since 2007. Cleaning is $10 per panel, $395 minimum. Call or text (813) 285-4505.

Can cleaning solar panels void the warranty?
Yes, it can. Panel manufacturers set out the cleaning methods they allow. Cleaning with a pressure washer or a stiff or abrasive brush can void the manufacturer's warranty. Canadian Solar, for example, says damage from inappropriate cleaning will void its warranty, and Qcells says cleaning damage is not covered.

Can I clean my own solar panels?
You can rinse them from the ground with a garden hose and a soft brush on a pole. Do not climb onto the roof, use a pressure washer or harsh chemicals, or spray cold water on hot panels.

How often should solar panels be cleaned in Florida?
For most Tampa Bay homes, once a year is a good guideline, often in late spring after pollen season. Homes under heavy trees or near salt water may need it more often.

Does rain clean solar panels?
Rain rinses off loose dust. It usually does not remove baked-on pollen, bird droppings, salt film or the leaves and debris that collect along the bottom edge of the panels.

How much does solar panel cleaning cost in Tampa?
At Fused Solar and Roofing, $10 per panel with a $395 minimum. The annual service plan (inspection, one cleaning, written report) is $495 a year for 1 to 25 panels, $595 for 26 to 45 and $695 for 46 to 65.

Questions, or ready to book? Call or text (813) 285-4505 or email [email protected].

Sources

blog author avatar

Fuze Inc DBA Fused Solar and roofing

Solar Installation, Roofing, and Detach & Reinstall Services for Tampa Bay. Comprehensive guides on solar maintenance, roof protection, and system upgrades with professional expertise.

Back to Blog

Solar not producing, or need the panels off for a new roof?

Call or text (813) 285-4505. Solar repair on any brand starts with a $395 on-site diagnostic. Re-roofing? See solar panel removal and reinstall. Dirty panels? Cleaning is $10 per panel, $395 minimum. High bill? Send us your bill for a free check.

Fused Solar and Roofing · 14034 N Florida Ave, Tampa, FL 33613 · (813) 285-4505 · [email protected] · CCC1331058 · EC13014750 · CBC1252064